MapQuest Driving Directions Barnesville, OH to Beverly, WV

Barnesville, OH

Beverly, WV

Route 1

Go east on I-70 E.
203.298 miles
3hr 19min
  1. Start out going north on N Chestnut St/OH-800 toward E Church St. Continue to follow OH-800.

    Then 5.67 miles
  2. Merge onto I-70 E.

    Then 17.03 miles
  3. Keep right to take I-470 E via EXIT 219 toward Bellaire/Washington PA (Crossing into West Virginia).

    Then 10.74 miles
  4. I-470 E becomes I-70 E (Crossing into Pennsylvania).

    Then 30.16 miles
  5. Merge onto I-79 S via EXIT 21 toward I-79 S/Morgantown (Crossing into West Virginia).

    Then 95.55 miles
  6. Take the US-33/US-119 exit, EXIT 99, toward Buckhannon/Weston.

    Then 0.24 miles
  7. Merge onto US-33 E toward Buckhannon/Elkins.

    Then 31.71 miles
  8. Take the WV-92 S/Old Route 33 ramp toward Crystal Springs.

    Then 0.18 miles
  9. Stay straight to go onto WV-92/Old US Highway 33. Continue to follow WV-92.

    Then 11.19 miles
  10. Turn right onto County Hwy-37/8/Bridge St.

    1. County Hwy-37/8 is just past Collett St

    2. If you reach Court St you've gone a little too far

    Then 0.04 miles
  11. Take the 1st right onto Water St.

    1. If you reach County Hwy-21 you've gone about 0.7 miles too far

    Then 0.08 miles
  12. Take the 1st right onto Collett St.

    Then 0.04 miles
  13. Take the 1st left onto Main St/US-250 N/US-219 N/WV-92/WV-55. Continue to follow US-250 N/US-219 N/WV-92/WV-55.

    1. If you reach Walnut St you've gone a little too far

    Then 0.58 miles
  14. Take the 1st right onto County Hwy-28/Dodson.

    1. County Hwy-28 is 0.1 miles past Edmonton Ave

    2. If you reach County Hwy-219/12 you've gone about 0.5 miles too far

    Then 0.09 miles
  15. Welcome to BEVERLY, WV.

    1. If you reach Missy Ln you've gone about 0.1 miles too far

    Then 0.00 miles